No. 400 Neoprene Contact Adhesive
For bonding to all Disc-O-Treds, Rubber Stair Treads or Koroseal Vinyl Stair Treads to concrete, pan filled, wood, metal, marble and terrazzo steps. A rapid drying, long range contact cement; specially formulated for Musson stair coverings. Brush on application; use on back of treads and back of nosing. Contains solvents, extremely flammable. 1 gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 5 gallon containers.
#400 Specs and Installation Instructions
No. 300 Water-Based Contact Adhesive
A non-solvent based alternative to install rubber and vinyl stair treads and cove risers to concrete, wood, terrazzo, metal or marble. One gallon covers 75 lineal feet of stair treads (brush on back of tread and step). Ready to use in 1 quart, 1 gallon and 4 gallon containers.
#300 Specs and Installation Instructions
No. 560 Rubber Flooring Adhesive
Environmentally Friendly
For installing Rubber Floor Tiles or Rolls over suitable on-grade dry concrete floors, suspended concrete floors, or suspended wood floors. May also be used with sanded back molded rubber stair treads. Not recommended where excessive moisture exists; Non-Carcinogenic; Non-Toxic; safe for the environment and freeze thaw stable. See label for complete instructions. Ready to trowel in 1 gallon or 4 gallon cans. Covers 150 square feet per gallon.
#560 Specs and Installation Instructions
No. 775 Epoxy Adhesive
Environmentally Friendly
The only recommended adhesive for use with Disc-O-Tile. May be used with other rubber stair treads, tile and flooring. A two-part solvent-free adhesive; contains one can Part A, one can Part B, and a stirring paddle. Covers approximately 150 square feet per unit.
#775 Installation Instructions
No. 110 Epoxy Stair Nose Caulk
Environmentally Friendly
Epoxy Stair Nose Caulk is recommended for all Stair Tread installations; Nose Caulk is necessary when installing Adjusta-Nose treads or when the step nosing is broken, worn or rounded. This two-part Epoxy Caulk will fill voids at the nose of the step and give needed support underneath the stair tread nose. Nose Caulk can also be used to repair the top surface of the step. Two-part mixture in quart units (mixing instructions on label) or in 13.5 oz. Dual-Cartridge, for use with our professional Dual-Cartridge Dispenser. Dual-Cartridge saves time, labor, mess and cleanup as caulk mixes in nozzle as it is dispensed. Dual-Cartridge yields approx. 50 lin. ft. of 1/4″ bead; quart unit yields approximately 75 ft.
#110 Installation Instructions
No. GSA-3 Grit Strip Adhesive
Use adhesive where Grit Strip is applied to porous surfaces such as wood or concrete. Grit Strip adhesive is recommended as a sealer; will give a better, longer lasting bond. One quart covers approximately 50 square feet (single coat) of Grit Strip; available in quart and pint units.
PT-24 Solvent-Free Carpet Tile Adhesive
A solvent-free latex-based adhesive for the installation of Premier Tiles and Super Scrape Parquet Tiles; can be used for interior or exterior applications. Available in 1 gallon cans which cover approximately 110 square feet.
No. 2230 Adhesive
No. 2230 Adhesive is a universal resilient flooring adhesive for use with our Luxury Vinyl Planks and Tiles. Coverage is approximately 140 square feet per gallon on porous surfaces and approximately 250 square feet per gallon on non-porous. Offered in a 1-gallon pail and a 4-gallon pail.
#2230 Specs and Installation Instructions
MUS2091 Adhesive
A pressure sensitive adhesive for installation of Rubber Sport Flooring.
TT-390 Adhesive
A non-flammable, environmentally safe adhesive for installation of Fluff Cord Tile and Designer Tile II.
#TT-390 Specs and Installation Instructions
Musson PBC20 & PBC220 Adhesive
A thin contact adhesive for attaching vinyl edging to vinyl back carpet mats.